Operating instructions
40
MCS2000 by MacAllister
In more detail...
GB
IE
Technical and legal information
Use the power tool, accessories and tool bits etc. in >
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardous situation.
Service
Have your power tools serviced by a qualied repair person >
using only identical replacement parts. This will ensure that
safety of the power tool is maintained.
Chain saw safety warnings
Keep all parts of the body away from the saw chain when >
the chain saw is operating. Before you start the chain saw,
make sure the saw chain is not contacting anything. A
moment of inattention while operating chain saws may cause
entanglement of your clothing or body with the saw chain.
Always hold the chain saw with your right hand on the rear >
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand conguration increases the risk
of personal injury and should never be done.
Wear safety glasses and hearing protection. Further >
protective equipment for head, hands, legs and feet is
recommended. Adequate protective clothing will reduce
personal injury by ying debris or accidental contact with the
saw chain.
Do not operate a chain saw in a tree. > Operation of a chain saw
while up in a tree may result in personal injury.
Always keep proper footing and operate the chain saw only >
when standing on xed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance
or control of the chain saw.
When cutting a limb that is under tension be alert for spring >
back. When the tension in the wood bres is released the spring
loaded limb may strike the operator and/or throw the chain saw
out of control.
Use extreme caution when cutting brush and saplings. >
The slender material may catch the saw chain and be whipped
toward you or pull you off balance.
Safety warnings
MNL_MCS2000_DFT_GB_V06_111108.indd 40 11/8/11 5:11:22 PM