User Guide MAC HOME REF.
16
Contents 4 General safety instructions 4 Types of notices 4 Basic safety instructions 5 Introduction 5 General description 5 Main features 6 Technical specifications 6 MAC HOME Model 7 Unit installation and configuration 7 Installation 7 Power supply connection 8 Cascade installation 8 General use of the unit 9 Fast menu guide 10 Initial configuration of the unit 10 Advanced configuration of the unit 10 Blocking the LCD and Joystick 11 Firmware update 11 Configuration of
General safety instructions JJ Read all of this user manual carefully before plugging in the unit. JJ Always have these instructions to hand during installation. JJ Follow all of the instructions and safety notices regarding unit handling. Types of notices The meaning of the safety notices used in this manual are described below. DANGER of DEATH OR INJURY DANGER This safety notice indicates a possible danger for the life and health of people.
Introduction General description KEY Power Supply C-VBS vídeo input Display (LCD) Control button Mains connector S-Video & component Video (YPbPr, RGB) L & R analogic audio inputs USB input (firmware actualization) TV Loopthrough input TV COFDM output Main features The MAC HOME model is an AV analogue TV signal to COFDM digital TV signal standalone modulator unit.
Technical specifications MAC HOME Input AV CVBS, S-VIDEO, YPbPr, RGB Format Input level (video) Vpp Input impedance Ω Video standards 75 PAL/SECAM/NTSC/B&W Audio standards Input level (audio) 0.7 ... 1.4 1 x mono/stereo Vpp 0.5 ... 2.5 Compresion Video MPEG2 MP@ML, H.264/MPEG4 AVC MP L4.
Unit installation and configuration The LCD display and the control button are sufficient for the basic settings of the unit. Follow the steps indicated below to install the unit and configure the various parameters accessible from the user interface on the LCD display. Installation 1 RISK OF damage to the unit 3) Optionally, connect the loop-through RF input coaxial cable (F connector). 4) Connect the coaxial output cable to the unit (F connector).
Cascade installation The MAC HOME unit has 1 AV analogue TV signal to RF UHF output encoded as COFDM Digital TV signal. Several MAC HOME units can be cascaded in order to increase this capacity. The maximum capacity of a series of N units is 1xN incorporated TV signals. To cascade 2 or more units, connect the RF output of the preceding unit to the TV input (loop-through) of the next unit (see illustration).
Fast menu guide INITIAL Installation IKUSI MAC Stating ... COUNTRY insert country COUNTRY AUSTRALIA COUNTRY SPAIN COUNTRY LANGUAGE MAC HOME 1.00 CH21 SYSTEM OK CHANNEL 21 OUTPUT CHANNEL ATTENUATION ATTENUATION 1.00 dB THE EQUIPMENT IS INSTALLED main menu ADVANCED Installation MAC HOME 1.
MAIN MENU NotE Over the following pages, the field locating and selection method is primarily indicated by the “vertical button movement” and “press button” icons. 1) Once the unit is started up, the start screen asks for the COUNTRY to be entered. Move the button to the right and the cursor will flash next to the first country, then move the button down until you find the reference country. OK to save * The unit automatically adjusts to the technical peculiarities of this (see default parameters table).
Firmware Update 1) Locate and select the option SYSTEM UPDATE. a) Download the update package from the website. b) Place in the root directory of a USB. c) Insert the USB in the connector in the unit. SYSTEM UPDATE ** WARNING ** CANCEL UPDATE SETTINGS THE SIGNALS NotE The unit can switch the input signals; alter their brightness, contrast and saturation conditions; and adjust the output carrier in RF.
b) Locate and select CH LCN. Configure the LCN value of the signal. c) Locate and select CH SID (used by default as output channel). Service set identifier. d) Locate and select CH NAME. Assign a name to the signalJ in CH. CH LCN 001 CH SID 0021 CH NAME CH1 NotE If you keep pressing the control button down you will access the information and configuration of the following input signals.
Note Position the cursor to the right of the current value and move the control button vertically to increase or decrease the current value. Hold the control button up or down to increase or decrease the current value more quickly. 1) Locate and select the option NETWORK. a) Locate and select the option NAME. Configure the name of the network. b) Locate and select the option PROVIDER. Configure the name of the network service provider. c) Locate and select the option NID.
STATUS OF THE UNIT NotE The unit lets you see its status in detail and the existence of active alarms in the module. 1) Locate and indicate STATUS. a) Locate and indicate STATUS: The unit displays its status and alarms: OK / Error. b) Locate and indicate OUTPUT BITRATE. The unit displays the output data speed in Mbits/s. c) Locate and indicate MIN ACT MAX NULL. The unit displays the volume of null data packets in the output (minimum, actual and maximum) as a percentage of the total.
Maintenance Unit care HANDLING THE INSIDE OF THE UNIT IS FORBIDDEN Do not dismantle or try to repair the unit, its accessories or its components. This will render the warranty null and void. JJ JJ JJ Do not use the power cable if it is damaged. To disconnect the power cable, pull carefully on the plug and not the cable. To clean the panel and unit connections: FF FF FF JJ JJ Unplug the unit. Clean with a slightly damp, soft cloth. Allow to dry completely before use. Do not spill liquid onto the unit.
Certificado . Certificate . Certification . Certificato EC-Declaration of Conformity marking We, Manufacturer IKUSI, Angel Iglesias, S.A. Paseo Miramón, 170 E-20009 San Sebastián, Spain declare that the product AV-COFDM Autonomous Modulator MAC HOME is in conformity with EMC LVD Council Directive 2004/108/CE (EMC Directive) Standards to which conformity is declared : and EN 50083-2 :2007 Cabled distribution systems for television and sound signals. Part 2: Electromagnetic compatibility for equipment.
Instrucciones seguridad . Safety instructions . Connsignes de sécurité .
Ángel Iglesias, S.A. Paseo Miramón, 170 20009 San Sebastián, Spain Tel. +34 943 44 88 00 Fax +34 943 44 88 20 television@ikusi.com www.ikusi.