User guide

1918

Unit installation and conﬁguration/Main menu

2) Enter the unblocking code assigned by the unit

operator through the web interface.

3) The unit displays the validity of the code.

NOTE

The unit will remain unblocked until it is restarted or the operator deactivates the

block from the web interface.

To unblock the unit without the blocking code:

1) Locate and select INFORmAtION.

2) Contact the supplier of the unit and provide the

serial number. The supplier of the unit will pro-

vide an unblocking code for the serial number

indicated.

Advanced conﬁguration of the unit

User interface via web browser

The web interface allows you to fully congure the MAC401 unit through an Ethernet con-

nection and a web browser.

NOTE

To display the graphics provided in the unit conguration program correctly, we

recommend installing the web browser Mozilla Firefox 1.5 or higher (www.mozilla.

com) in the control PC.

NOTE

Cookies and Javascript must be enabled.

NOTE

Use a PC with an Ethernet network card and an Ethernet CAT-5E crossover cable.

1) Access the tCP/IP PROPERtIES of the PC and congure the following parameters:

IP ADDRESS OF tHE PC: 192.168.1.1

SuBNEt mASk: 255.255.255.0

2) Connect the PC to the LAN (RJ-45) port of the MAC 401 unit (see number 11 on the

diagram in the section General description).

NOTE

The initial process must be made in local mode, although later you will be able to

access the unit from any PC in the LAN.

NOTE

The Ethernet connector of the MAC401 has two indicator lights:

The link is correct when the link LED (to the left of the Ethernet connector) is

lit.

There is activity in the link when the activity LED (to the right of the Ethernet

connector) is ashing.

3) Launch the web browser and enter the MAC 401 unit's IP address:

INItIAL IP ADDRESS: 192.168.1.6

NOTE

This initial IP address may be modied by the user.

NOTE

The unit also has the IP address 10.254.254.254 assigned by default.