User guide

Unit installation and conﬁguration/Main menu

Blocking the LCD and joystick

6) Locate and select the option LOCk LCD to

block access to the conguration from the LCD

display and using the control button.

a) Activate (ON) or deactivate (OFF) the

blocking option.

b) Establish a code to unlock the unit if this

option has been activated.

Setting the signals

NOTE

The unit can switch the input signals; alter their brightness, contrast and satura-

tion conditions; and adjust the output carrier in RF.

1) Locate and select the option SEttINGS.

Conﬁguring the input signals

1) Locate and select the option INPut.

a) Locate and select the option CH1:*****

bRIGHt to check the type of input signal,

the video and audio detection, and con-

gure the brightness of the video signal (1

to 255).

b) Locate and select the option CONt1

SAtuRAtION to congure the contrast

and saturation of video signal 1 (1 to 255).

c) Locate and select the option INP AuDIO

Att 1 to congure the attenuation of audio

signal 1 (0 to 40)

d) Locate and select the option SHARPNESS

1 to congure the sharpness of video sig-

nal 1 (HIGH, mEDIum SOFt or NONE).

e) Locate and select the option CODING 1.

This congures the coding parameters:

MPEG2.