Operating instructions

TM 5-4310-452-14
5-33. FIBERGLASS PANELS REPLACEMENT.
This Task Covers:
a. Removal c. Installation
b. Cleaning
Initial Setup:
Equipment Conditions: Materials/Parts:
• Engine off. • Adhesive (Item 1, Appendix E)
Tools/Test Equipment: • Dry cleaning solvent (Item 3, Appendix E)
• General mechanic's tool kit • Rags (Item 11, Appendix E)
General Safety Instructions: • Fiberglass panel (as required)
• Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a. REMOVAL
DOOR ASSEMBLIES
1. Remove left or right door assembly (see paragraph 5-28).
2. Remove fiberglass panels (4, 8, and 15) from door assembly (16). Discard fiberglass panels.
FRONT END PANEL ASSEMBLY
1. Remove front end panel assembly (see paragraph 4-82).
2. Remove fiberglass panel (7) from front end panel assembly (6). Discard fiberglass panel.
REAR END PANEL ASSEMBLY
1. Remove rear end panel assembly (see paragraph 5-29).
2. Remove fiberglass panel (13) from rear end panel assembly (14). Discard fiberglass panel.
RIGHT FRONT PANEL
1. Remove right front panel (see paragraph 5-30).
2. Remove fiberglass panel (5) from right front panel (3). Discard fiberglass panel.
ROOF ASSEMBLY
1. Remove roof assembly (see paragraph 5-31).
2. Remove fiberglass panel (1) from roof assembly (2). Discard fiberglass panel.
ENGINE BAFFLE ASSEMBLIES
1. Remove engine baffle assemblies (see paragraph 5-27).
2. Remove fiberglass panels (11 and 12) from front and side engine baffle assemblies (9 and 10). Discard
fiberglass panels.
5-76