Operating instructions

TM 5-4310-452-14
5-6. ENGINE BLOCK REPAIR.
This Task Covers:
a. Disassembly b. Assembly
Initial Setup:
Equipment Conditions: Materials/Parts:
• Engine off. • One encased plain seal
• Engine removed (see paragraph 5-5). • One shaft seal
• Vibration damper and V-belt pulley removed (see • Four cylinder oil spray nozzles
paragraph 5-9). • Six preformed packings
• Air compressor removed (see paragraph 5-35). • Eleven lockwashers
Tools/Test Equipment:
• General mechanic's tool kit
• Electric drill
• Oil nozzle tool (003-1798)
• Twist bit drill
5-13