Operating instructions

TM 5-4310-452-14
4-93. MOISTURE FILTER/SEPARATOR REPLACEMENT,
THIS TASK COVERS
a. Removal b. Installation
INITIAL SETUP
Equipment Conditions: Tools/Test Equipment:
• Engine off. • General mechanic's tool kit
• Left and right door assemblies open.
• Battery cables disconnected (see paragraph
4-57).
• System air pressure relieved.
a. REMOVAL
1. Disconnect tube fitting (5) from elbow (4).
NOTE
Nipple may stay in either moisture filter/separator or pipe tee.
2. Remove moisture filter/separator (1) from pipe tee (3) and nipple (2).
3. Remove elbow (4) from moisture filter/separator (1).
TA505544
4-190