Operating instructions

TM 5-4310-452-14
4-49. CONTROL PANEL REPLACEMENT.
This Tasks Covers:
a. Removal b. Installation
Initial Setup:
Equipment Conditions: Materials/Parts:
• Engine off. • Twelve rivets
• Left and right door assemblies open.
• Battery cables disconnected (see paragraph Tools/Test Equipment:
4-57). • Electric drill
• Engine starting aid cable removed (see para- • Rivet gun
graph 4-28), • Twist drill bit, 1/8 in.
• Stop cable removed (see paragraph 4-29).
• Light switch removed (see paragraph 4-45).
• Start switch removed (see paragraph 4-46).
• Safety circuit bypass switch removed (see
paragraph 4-47).
• Service-air valve removed (see paragraph 4-48).
• Shutdown relay removed (see paragraph 4-62).
REMOVAL
1. Remove identification marker (1) from control panel (2).
2. Using electric drill and 1/8 in. twist drill bit, remove 3 rivets (5) from hinge (6) and control panel (2). Discard rivets.
4-93