Installation manual

IP DECT Installation Page 90
15-601085 Issue 04f (11 June 2009)IP Office
6.2 DECT Monitor
DECT Monitor is an Windows program that gives a real time overview of the IP DECT system including the operation of
phones and base stations.
This tool imposes a processing load on the ADMM and so should only be used when absolutely required. It operation is
enabled/disabled though the DECT monitor setting within the ADMM configuration.
DECT Monitor Software
1. The DECT Monitor software (DECTNetmonitor.exe) is located in the IPDECT folder on the IP Office Administration
Applications CD and DVD. The files does not need to be installed.
Enabling Use of DECT Monitor
1.Using a web browser login to the ADMM base station.
2.From the Home menu select System.
3.Select System Settings.
4.Select DECT Monitor in order to allow use of the DECT Monitor application.
· Important
Only enable this option when required and always disable it after monitoring is complete. The outputting of
information for the DECT monitor application imposes a processing load on the ADMM.
Running DECT Monitor
1.Enable DECT Monitor in the ADMM configuration as described above.
2.Double-click on DECTNetmonitor.exe.
3.Click OK.
4.Enter the IP address of the ADMM base station and click OK.