Installation manual

IP DECT Installation Page 85
15-601085 Issue 04f (11 June 2009)IP Office
ADMM Web Access: ADMM Licensing
5.8 Restarting the ADMM
This menu can be used to manually restart the ADMM if required. Doing this will terminate all current calls on the IP DECT
system.
1.From the Home menu select System.
2.Select System Settings
3.Click Restart.
4.The Discard All Settings option can be used to reset the configuration. Only select this option if absolutely
necessary.
5.Click OK.
6.The following message is displayed:
7.The ADMM web login page is displayed after the ADMM restarts.