Installation manual

IP DECT Installation Page 81
15-601085 Issue 04f (11 June 2009)IP Office
ADMM Web Access: System Features
TFTP Based Directory
The following fields for obtaining a TFTP based directory can be edited, if the Type is set as TFTP.
· Server Name
Set this to the IP address of the IP Office control unit.
· Server Port: Default = 69.
The default is the port on which the IP Office control unit listens for TFTP requests.
· Internal List: Default = nasystem/user_list7
This is the path and file. It can be up to 127 characters. The default is the IP Office user list (nasystem/user_list7).
· If a source other than the IP Office is selected, the expected format for each line is User Name, Extension
Number, Full Name.
· External List: Default = nasystem/dir_list
This is the path and file. It can be up to 127 characters. The default is the IP Office directory (nasystem/dir_list).
If a source other than the IP Office is selected, the expected format for each line is Name, Number with entries
separated by \n.
· Update Interval
This sets the frequency with which the lists are requested from the server. A value of zero indicates not to update
the lists after the first update. Clicking the OK and then Update initiates an immediate reading from server.