Installation manual

IP DECT Installation Page 79
15-601085 Issue 04f (11 June 2009)IP Office
ADMM Web Access: System Features
5.6.3 System Features | Digit Treatment
This menu allows you to configure the IP DECT system to alter the dialing resulting from numbers received via the
directory and WML features. The digit treatment takes place before the number is transmitted to the handset menu. The
digits are treated in two steps:
· First all invalid characters like space or hyphens are removed from the number. For example [phone]
will be substituted by [phone].
· Next the best match is searched for within the prefixes listed in the Digit Treatment table. When a match is found,
the prefix is substituted by the indicated substitute from the table. For example, if the best match for
[phone] is the prefix [phone] with the substitute ' ' (blank); the result is 4492.
For IP Office installations this menu is unlikely to be required, necessary digit translation being performed for all types of
phones by the IP Office.
1.Using a web browser login to the ADMM base station.
2.From the Home menu select System Features.
3.Select Digit Treatment.
4.To delete an existing entry click on the icon next to the entry.
5.To edit an existing entry click on the icon next to the entry.
6.To add an entry click on New.
· Up to 128 entries.
· Each prefix may be composed of the digits 0 to 9 and the characters * and #. In conformance to LDAP
standards the first character of prefixes may be +. Up to 15 digits per prefix are possible. Spaces are not
allowed.
· Each substitute may be composed of the digits 0 to 9 and the characters * and #.
· Entries may be valid for several regions. The region numbers have to be separated by , (comma), for
example 1,2,3 or may be defined as range by - (hyphen), for example 1-3.