Installation manual

IP DECT Installation Page 77

15-601085 Issue 04f (11 June 2009)IP Office

ADMM Web Access: System Features

5.6.2 System Features | Media Server Features

This menu allows you to configure the media server feature available to the IP DECT phones and the associated signalling

to the media server (IP Office) necessary for those features. The settings are is sub-divided into those available to the

phone when idle and those available when active.

These are features available through the display menus on the phones. The use of normal DTMF dialing to activate IP

Office user and system short codes is not affected by this menu.

On the phone the options configured on this menu and set as Active are accessed as follows. Press either Menu in idle

state or Option in active state to show menu items on the display. Features are not configured and set as Active are not

displayed.

1.Note: Changes to these settings are not shown on handsets until Update is selected on the IP DECT Handsets

menu.

2.Using a web browser login to the ADMM base station.

3.From the Home menu select System Features.

4.Select Media Server System Features.

· Active

For items where a Feature Access Code has been configured, this control enables or disables display of the

feature on IP DECT phones.

· Mute

For some features, select this option if it is required to mute the phone when the feature is being used.

· Feature Access Code

The active flag for a feature can only be set if the Feature Access Code field is configured. The field should

be configured with the appropriate digits (0 to 9, * and #) necessary to active the feature on the IP Office.

These should match the system short code for the feature.

· When configuring the Media Server System Features, the ADMM options may not be the same as the

Media Server. For example; the Call Forward Busy/No reply has a combined option in the ADMM. On

IP Office, this is two separate options. You can choose either option by entering the relevant Feature

Access Code.

· The following are the default IP Office system short codes.

· Call Pickup: *30

· Directed Call Pickup: *32*

· Send All Calls Enable: *08

· Send All Calls Cancel: *09