Installation manual

IP DECT Installation Page 70
15-601085 Issue 04f (11 June 2009)IP Office
· IP Region
The IP region with which the base station operates. The regions need to be created before the base station
can be assigned.
· DECT Settings
This option can be used to disable the DECT service of a base station. This option is used chiefly for the ADMM
base station. If the ADMM is used for DECT, up to 50 simultaneous calls are supported on the IP DECT
system. If the ADMM base station is not providing DECT, up to 100 simultaneous calls are supported on the IP
DECT system.
· DECT Cluster
This is the physical area cluster to which the base station belongs. All the base station in the cluster should be
given the same number. The ADMM base station uses this value to determine which base station should
synchronize with each other.
6.Click OK.