Installation manual

IP DECT Installation Page 62
15-601085 Issue 04f (11 June 2009)IP Office
· Syslog
The IP DECT base stations can output RFC 3164 syslog messages. Those messages can be viewed using
standard Syslog tools (not part of the IP Office or IP DECT software suite).
· IP Address
Enter the IP address of the Syslog server.
· Port
Enter the port on which the Syslog server is configured to receive Syslog messages.
· Date and Time
The time and date are shown on the display of 3711 phones when idle. If SNTP is not being used to obtain the
date and time, the current values can be entered through this menu. The date and time has to be configured
after every restart of the ADMM base station.
· Time Zone
The time zone is shown here but is configured through the IP Regions menu.
· Local Time
Enter the current time.
· Locale Date
Enter the current date.