Installation manual

IP DECT Installation Page 54
15-601085 Issue 04f (11 June 2009)IP Office
4.3 IP Office User Creation
For each IP DECT handset, matching extensions have to be created within both the IP Office configuration and the ADMM
configuration. This section covers the creation of IP DECT extensions (and their associated users) within the IP Office
configuration.
The DECT Extension menu will only be active if at least one IP DECT Line has been configured. Up to 120 IP DECT
extensions may be created.
· Important: Auto-Create Extension
If Auto-create extension is enabled on the IP DECT line settings, much of this process can be ignored. The IP
Office will automatically create an extension and user entry when the handset configured in the ADMM is
subscribed. The user entry can then be configured as per any normal IP Office user.
Warning
1.Adding extensions to the IP Office configuration manually requires the IP Office to be rebooted. This will end any
current calls and services on the IP Office.
Information Required
· ¨ Handset User Details
User extension numbers and name.
· ¨ IP Office Login
Service user name and password with Administrator or Manager security group rights for the IP Office. Those
rights are required in order to create new extensions.
Tools Required
· ¨ IP Office Manager
PC running the IP Office Manager application.
Process
1.Start IP Office Manager and click to receive the configuration from the IP Office system.
2.In the left hand pane click on Extension.
3.Right-click on Extension and select New and then IP DECT Extension.
4.The extension details are shown in the main right-hand pane.
5.In Base Extension enter the extension number that the IP DECT extension should use. This must be a unique
number not used by any other IP Office extension or hunt group. Allowable numbers are up to 9 digits. Refer to
the IP Office Manager help for full details on number ranges usable.
6.The remaining fields on the Extn tab are for information only.