Installation manual

IP DECT Installation Page 52
15-601085 Issue 04f (11 June 2009)IP Office
Process
1. Stage 1: Obtaining the Handset IPEI
The IPEI is a serial number unique to each handset. An entry for the handset with the matching IPEI must exist in
the ADMM configuration before the handset can subscribe to the IP DECT system. For 3701 and 3711 handsets the
IPEI can be obtained as follows:
1.1. Power on the handset.
1.2. Press Menu.
1.3. Select System | Subscription | IPEI. Note the number displayed.
1.4. Press Esc to return the phone to the normal standby menu.
2. Stage 2: Adding Handset Details to the ADMM Configuration
An entry must be created that matches the IP Office extension and user
2.1. Using a web browser connect to the ADMM base station.
2.2. Select IP DECT Handsets.
2.3. Select New.
2.3.1.For 3701 and 3711 handsets leave the Type as Auto.
2.3.2.Enter the Name for the user as set in the IP Office configuration.
2.3.3.Enter the Number that matches the extension number set in the IP Office configuration.
2.3.4.Enter the IPEI number as it is shown on the handset.
2.3.5.The Authentication Code is used during the subscription of the phone to the IP DECT system.
2.3.6.Ensure that you have a note of the Name, Number, IPEI and Authentication Code.
2.3.7.Click OK.
2.4. Repeat the above steps for any other handsets being added.
3. Stage 3: Enabling Handset Subscription on the IP DECT system.
This stage of the process enables phone subscription:
3.1. Click Subscribe. A green tick mark icon is displayed while handset subscription is enabled.
4. Stage 4: Subscribing Handsets
This stage describes the sequence for 3701 and 3711 phones. For other GAP compatible phone types to subscribe
refer to the phone manufacturers documentation.
4.1. On the 3701/3711 phone press Menu.
4.2. Select System and press OK. No Subscription is displayed.
4.3. Press New.
4.4. Enter the PARK number of the IP DECT system and then press go on.
4.5. Enter the authentication code enter for the handset in the ADMM configuration.
4.6. Press OK.
4.7. If subscription is successful, the name and number as set in the ADMM configuration are displayed.
4.8. It should be possible to make test calls between the handset and other IP Office extensions.
4.9. Repeat for another other phones that need to be subscribed.