Installation manual

IP DECT Installation Page 46

15-601085 Issue 04f (11 June 2009)IP Office

4. Handset Installation

This section is divided into the following sections:

· Upgrade the Phone Firmware.

It may be necessary to upgrade the existing firmware on the supplied IP DECT handsets to match the software

being used by the IP DECT base stations. The necessary software to do this firmware upgrade are included on the

IP Office Administrator Applications CD or DVD. A special serial or USB cable is required for the PC to handset

connection required during the firmware upgrade.

· Add Handset to the ADMM

Details of the handset need to be added to the ADMM configuration before the handsets can subscribe to the IP

DECT system.

· IP Office User Creation

If the auto-create extension facility has been enabled (on the IP Office IP DECT line), this stage is only required for

editing the IP Office user entries if required.

Information Required

· ¨ Handset User Details

User extension numbers and name.

· ¨ ADMM Details

IP address, name and password for ADMM web access.

· ¨ IP Office Login

Service user name and password with Administrator or Manager security group rights for the IP Office. Those

rights are required in order to create new extensions.

Tools Required

· ¨ IP Office Manager

PC running the IP Office Manager application.

· ¨ PC Web Browser

Used for web access to the ADMM base station.

· ¨ IP DECT Phone Upgrade Cable

Two types of cable are available, serial and USB. For North America only the USB cable is available.

· ¨ IP DECT Phone Upgrade Serial Cable

This is a serial cable that plugs into the side of the 3701 and 3711 phone being upgraded.

· ¨ IP DECT Phone Upgrade USB Cable

The is a USB cable that plugs into the side of the 3711 phone being upgraded.

· ¨ IP Office Administrator Applications CD or DVD

Contains the software required for this process.