Installation manual

IP DECT Installation Page 40
15-601085 Issue 04f (11 June 2009)IP Office
3.5 ADMM Setup
This sequence is applicable only to a simple IP DECT system with all base stations in the same IP region and the same
cluster.
Information Required
· ¨ Base Station Details
The base station MAC addresses and the clusters.
· ¨ IP Office Details
The IP address of the LAN connection to the IP Office.
Tools Required
· ¨ Web Browser
Used for web access to the ADMM configuration.
Process
1.Start the web browser.
2.Enter http:// followed by the IP address of the ADMM base station.
3.Enter the User Name and Password for the ADMM base station. The default user name and password are craft
and crftpw.
4.If login is successful the ADMM configuration Home menu is displayed. You can return to this menu from any sub-
menu by clicking on Home.
5.Select System and then System Settings.
· Enter a System Name that describes the system's location.
· Change the Regulatory Domain from None to either EMEA (ETSI) or US (FCC/IC) as appropriate.
· Adjust the Local Time and Local Date. The time zone cannot be changed at this point but not adjusting the
date will cause an error message.
· Click OK.