Installation manual

IP DECT Installation Page 34

15-601085 Issue 04f (11 June 2009)IP Office

3.3 Using IP Office DHCP

The IP DECT base stations can be installed using DHCP if a DHCP server is available. This can include using the IP Office

as the DHCP server if no other DHCP is present on the network. The process below covers use of the IP Office. If a 3rd

party DHCP server is to be used, refer to the DHCP Server Operation notes in the appendix.

Prerequisites

· The TFTP Server must be running and tested. See 2. TFTP Server Setup .

Warning

· Adding a line requires the IP Office to be rebooted. That will end any current calls and services on the IP Office.

Information Required

· ¨ IP Office Login

Service user name and password with Administrator or Manager security group rights for the IP Office. Those

rights are required in order to create new extensions.

· ¨ ADMM Details

The IP address and MAC address of the base station that will act as the ADMM.

· ¨ Base Station Details

The MAC addresses of the IP DECT base stations.

Tool Required

· ¨ IP Office Manager

PC with IP Office Manager.