Installation manual

IP DECT Installation Page 31

15-601085 Issue 04f (11 June 2009)IP Office

Base Station Installation: TFTP Server Setup

3.2 Static Base Station Configuration

This stage covers configuring the IP address settings of the base stations. This is best done before the base stations are

mounted in position.

· This process uses static IP address setup. If DHCP address setup is required see Dynamic Base Station

Configuration .

Prerequisites

· The TFTP Server must be running and tested. See TFTP Server Setup .

Information Required

· ¨ Base station MAC address

This is printed on a label on each base station.

· ¨ Base Station IP Address Details

As follows:

· ¨ IP Address for each base station (Mandatory).

· ¨ Subnet Mask (Mandatory).

· ¨ TFTP Server IP Address (Mandatory).

· ¨ TFTP File Name (Mandatory).

· ¨ ADMM Base Station IP Address (Mandatory).

· ¨ Default Gateway IP Address (Optional).

· ¨ DNS Address (Optional).

· ¨ DNS Domain (Optional).

· ¨ Broadcast Address (Optional).

· ¨ NTP Server Address (Optional).

· ¨ Syslog IP Address (Optional).

· ¨ Syslog Port (Optional).

· ¨ VLAN ID (Optional).

Tools Required

· ¨ IP Office System Status Application

PC with IP Office Manager and IP Office System Status Application (SSA) Installed. Installation of this application

also installs the necessary Java components to use the ADMM Configurator tool.

· ¨ IP Office Administrator Application CD or DVD

The software tool required is the ADM_Configurator.jar file located in the IPDECT folder. This tools needs Java

Runtime Environment version 1.4 or higher installed on the PC. That can be achieved by installing the IP Office

System Status Application (SSA).