Installation manual

IP DECT Installation Page 28
15-601085 Issue 04f (11 June 2009)IP Office
3. Base Station Installation
This section does not cover the physical installation of the base stations, ie. wall mounting and connection of power
supplies. That should be done in accordance with the information provided with the base stations. This section covers the
software configuration of the base stations.
Installation Stages
· TFTP Server Setup
Required to provide software to the IP DECT base stations.
· Base Station IP Address Configuration
The basic settings of IP address and location of the TFTP server are input into the base stations using one of the
following methods.
· Static IP Addressing
· Dynamic (DHCP) IP Addressing using IP Office
· Dynamic (DHCP) IP Addressing using a 3rd Party DHCP Server
· IP DECT Line Creation
An IP DECT line is required in the IP Office configuration. If the IP Office is providing DHCP support for the base
station, this will have been setup as part of the DHCP configuration above.
· ADMM Configuration
Basic configuration of the IP DECT system is required in order for the base stations to connect to each other.
· ADMM Licensing
Once basic ADMM configuration has been completed and all the base stations are connected, the system license
can be obtained and entered.
Prerequisites
· ¨ Site Survey
A site survey must be performed. This may be done as part of the installation or prior to installation. Regardless a
site survey is necessary as most DECT problems will center on base station coverage.
· ¨ Product Knowledge
Ensure that you have read this documentation fully before starting installation.
· ¨ Handset Charging
Handset installation, though performed after base station installation, requires the handset to be charged.
Therefore while base station installation is being performed, ensure that the IP DECT phones are placed into their
charging cradles and are charging.
Information Required
1.¨ TAN (Transaction ID Number)
This number is provided with the IP DECT system when ordered.
2.¨ Base Station MAC Addresses
MAC Addresses of the base stations selected for license validation.
3.¨ Licensing Site URL
http://licence.aastra-detewe.de/Avaya.
4.¨ IP Office Details
The IP address of the LAN connection to the IP Office.
5.¨ IP Office Login
Service user name and password with Administrator or Manager security group rights for the IP Office. Those
rights are required in order to create new extensions.
6.¨ ADMM Details
The IP address and MAC address of the base station acting as the ADMM.
7.¨ Base Station MAC Addresses
8.This is printed on a label on each base station.
9.¨ Base Station Clusters
10.¨ Base Station IP Address Details
As follows:
· ¨ IP Address for each base station (Mandatory).
· ¨ Subnet Mask (Mandatory).