Installation manual

IP DECT Installation Page 11
15-601085 Issue 04f (11 June 2009)IP Office
IP DECT: Base Stations
RFP32
This base station is for indoor use only. It has integral omni-directional aerials and can be powered by either a mains
adapter or by 802.3af Power over Ethernet supply. The RFP32 has 3 separate LEDs in red, orange and green showing the
different states during startup and operation.
RFP33
This base station can be used indoors and outdoors. It has two external omni-directional aerials. The base station can
only be powered using an 802.3af Power over Ethernet supply. Connection requires the base station to be opened and
the LAN cable to be connected to an internal IDC punch down connector block.
This type of base station is no longer available from Avaya and is not supported in North America.
RFP34
This base station can be used indoors and outdoors. It has two external omni-directional aerials. The base station can
only be powered using an 802.3af Power over Ethernet supply. Connection requires the base station to be opened and
the LAN cable to be connected to an internal RJ45 or IDC punch down connector block.