Letter from the President customers, 30 years of satisfying er ov ter Af ! ica er rs in Am iated reward.
Introducing the HTP Arctic Chill 5460 Water-Cooler for TIG welding. The Arctic Chill 5460 features a flat, folding handle for easy portability; we’ve seen many coolers without handles, and it’s always a struggle to get the cooler out from underneath your welder or in and out of your cart. The convenient, screw-cap fill and bottom drain make filling and changing coolant quick and easy.
TIG Welders and TIG Welding Accessories Invertig 221 When we introduced our first 200 amp AC/DC inverter machine 10 years ago, we were up against some major competitors. However, the market readily accepted the tough line of HTP Invertig welders. Fast forward to today—HTP introduces our third generation of AC/DC inverter machines, the HTP Invertig 221! HTP continues to set new standards in AC/DC inverter welders with the Invertig 221.
The Invertig 221 provides outstanding performance when stick welding in either AC or DC modes. The 221 is an excellent DC welder. The smooth, stable arc coupled with the 221’s high speed DC pulse makes intricate work on mild steel, 4130, stainless, inconel, and titanium a breeze. The high speed DC pulse focuses the DC arc much like the AC balance focuses the AC arc; the end result—more control and less arc wandering. With a pulse rate of up to 999pps, there isn’t a job out there the 221 can’t handle.
TIG Welders and TIG Welding Accessories Invertig 131 DC/HF #70131DCHF List $1095.00 | Sale $884.00 You have to see it to believe it! A combination TIG/stick welder delivering an impressive 130 amps of high performance DC TIG welding power, packaged in a compact, 11 lb., go-anywhere cabinet. It’s the HTP Invertig 131 DC/HF, and you’ll be happy to know that its affordable price tag is equally hard to believe.
TIG Torch Holder #90190 TIG $17.95 Keep your work station organized! This handy magnetic based TIG torch holder is an easy way to keep your TIG torch close at hand, but not in the way. Did you ever lay your TIG torch on the welding table, only to have it fall off and break the cup? The TIG torch holder is the solution! You can easily keep your torch close, and your fabrication area in order, with the HTP TIG torch holder. TIG Welding Machine Covers Your HTP TIG welder is an essential part of your shop.
TIG Welders and TIG Welding Accessories TIG Filler Rod Filler Rod for TIG Welding In TIG welding, the filler rod is fed into the molten puddle by hand. The choice of filler rod is extremely important as the rod must correctly match the material and alloy you will be welding. The thickness of the material to be welded determines the diameter of the filler rod. Here are some good rules of thumb to help you select the correct filler metal: 4043 is a good general filler metal for most aluminum applications.
Selecting the correct tungsten electrode is important to getting high-quality welds and making your welding easier. Some important factors to be considered in making the right choice are type of power source (Inverter or transformer), material to be welded (steel, aluminum, or stainless steel), and the thickness of the material. 2% Ceriated Tungsten (TC2)—Orange Tip. An excellent substitute for 2% Thoriated tungsten if you are using a transformer-based power source for DC welding.
TIG Welders and TIG Welding Accessories Pyrex Cups & Kits Nothing makes welding easier than being able to see what you are doing. HTP’s Pyrex Cup kits do just that! The clear Pyrex cup gives you unparalleled visibility of the arc and work. The Pyrex cup kit also comes standard with our special gas saver gas lens. This unique system saves gas while at the same time providing better gas coverage with a more even and uniform gas flow, eliminating gas turbulence which can cause weld quality problems.
Parts for 9 Series Air Cooled and 20 Series Water Cooled TIG Torches 1 Tungsten Diameter 2 Illus # Description 3 2A 1A Parts for 17 & 26 Series Air Cooled and 18 Series Water Cooled TIG Torches 1 2 3 Gas Lens Configuration (optional) 1 Alumina Nozzle (Pkg 10) 2 Gas Lens Collet Body (Ea.) 3 Collet (Pkg 5) Standard Configuration 1A Alumina Nozzle (Pkg 10) 2A Collet Body (Pkg 5) 3 Collet (Pkg 5) 0.040" 1/16" 3/32" 1/8" Price 53N59 45V42 13N21 53N60 53N61 53N61S $7.50 45V43 45V44 45V45 $2.
TIG Welders and TIG Welding Accessories TIG Accessory Kits Pyrex Cup Kits Stay neat and organized with our Pyrex Cup Kits. Each kit includes a handy compartmentalized box with part numbers and diameters. This kit includes all the necessary components to allow you to use your Pyrex cup with the following tungsten diameters: .040", 1/16", 3/32" and 1/8". Each kit includes: Heat Shield, Wedge Collet, Collet Body, Tungsten Adapter, and Pyrex Cup. Wedge Collet and Tungsten Adapter come in .
Nothing makes TIG welding easier than a high quality TIG torch with a nice flexible cable – that’s why HTP offers replacement TIG welding torches for just about all brands of TIG welders – so you can get better results easier. All HTP air-cooled TIG torches feature one piece cable designs, constructed from an extremely flexible, silicon rubber hose with a braided nylon weave overlay. These cables even stay flexible in cold weather.
MIG Welders and MIG Welding Accessories From the Inside... to the Outside... HTP Welders are built tough to last long! Control Transformer – Provides low voltage to run the printed circuit board, wire drive motor, and main relay. While many companies take this voltage from the main welding transformer, shortening the life of the transformer and not providing as stable a voltage supply, our machines come standard with this separate transformer.
Stitch and Spot Welding – Many other companies charge extra for these features, but at HTP they are standard equipment. Why? Because it makes welding on light gauge sheet metal easier and faster with less warpage and less chance of burn through. Recessed Controls – All of our potentiometers are recessed, which helps prevent accidental damage. Full Undercarriage – HTP includes wheels and a gas bottle tray as standard equipment.
MIG Welders and MIG Welding Accessories HTP MIGs at a Glance MIG 2400 MIG 160DV 110V 220V MIG 160 MIG 140 MIG 130 130 Maximum Output Amperage 240 200 140 160 160 140 Minimum Output Amperage 20 20 20 20 20 25 25 3/8˝ to 1/2˝ 5/16˝ to 3/8˝ 3/16˝ to 1/4˝ 1/4˝ to 5/16˝ 1/4˝ to 5/16˝ 3/16˝ to 1/4˝ 1/8" to 24 24 6 8 8 6 4 20% @ 160 amps 100%@78 amps 20% @ 140 amps 100% @ 62 amps 10%@130 amps 100%@40 amps 19 to 35 20 to 35 19 to 30 Yes Yes No Maximum Recommended Thic
#602401-ST-24 List $1999.00 | Sale $1499.00 We developed the MIG 2400 for the fabricators out there who want a powerful, dependable welder that won’t let them down. We also designed it for the farmers who need a rugged unit for heavy fabrication, implement modification, and serious repair work.
MIG Welders and MIG Welding Accessories MIG 200 #60200 List $1799.00 | Sale $1299.00 We haven’t talked to anyone who had a project this hardworking MIG welder couldn’t handle. With 200 amps of welding power, anything up to 3/8˝ thick is fair game. Yet the MIG 200 is refined enough for your most delicate jobs – all the way down to the very finest, light gauge sheet metal. Anybody who welds will appreciate the power and performance features of the MIG 200.
#60160DV List $1799.00 | Sale $1299.00 Our MIG 160DV (Dual Voltage) operates on either 110 or 220 volt power. A simple idea, but think about it: crowded body and muffler shops can use it anywhere. Do-it-yourselfers can run it in the basement, garage, or workshop! Racers especially appreciate the ability to work on 220 volts in the shop, then go out to the track for on-site repairs on 110 volts.
MIG Welders and MIG Welding Accessories MIG 130 #60130 List $749.00 | Sale $449.00 The versatile welder uses both 8” and 4” diameter spools of wire. It comes ready to weld with extra tips, and a roll of .035” flux cored gasless wire. Just add a regulator, a tank of 75% argon, 25% CO2 shielding gas, and some hard wire, and you can MIG weld with gas. HTP backs this machine with a 90-day money-back guarantee and a 3-year warranty.
MIG/Plasma Cart #WLDTROLLEY#3 Retail $129.95 Sale $99.95 MIG Welding Machine Covers You’ve got a healthy investment in your MIG welder, so keep it in top shape with an HTP Welding Machine Cover. Made from polyester-backed, marine vinyl, these water resistant, non-flammable covers are specially crafted to protect your machine from moisture, dust, and other harmful workshop elements.
MIG Welders and MIG Welding Accessories HTP Spool Guns When extra length is required for those special jobs. The HTP RSG250 Spool Gun is the perfect solution when you need some extra distance between you and the welding machine. This state-of-the-art gun, available in 25’ and 50‘ lengths, is ideally suited for applications ranging from farm machinery and semi-trailer repair to construction site jobs or any other application where the power source can’t be brought to the work.
Part # 15500 15501-15 15510 15512 15515 Flexible Swan Neck Only Conversion kit for HTP Style Guns 10’ gun fits HTP MIG welders 12’ gun fits HTP MIG welders 15’ gun fits HTP MIG welders Price $70.95 $73.95 $117.95 $127.95 $137.95 Complete guns are needed to convert your Century, Hobart, Lincoln or Miller gun to a flexible swan neck. If the current gun you are looking for is not listed below, please call us for availability and a quote on complete guns to fit your specific needs.
MIG Welders and MIG Welding Accessories MIG Welder Accessories 40011- Aluminum Welding Kit 40011-24 for MIG 2400 40011-T for Tweco Style Guns List $85.70 List $85.70 List $85.70 Sale $67.95 Sale $67.95 Sale $67.95 One of the benefits of MIG welding is the flexibility to weld a wide range of metals. Steel, stainless steel, cast iron and brazing are relatively simple, requiring no more attention than changing the shielding gas. Aluminum is an entirely different animal.
HTP Welding Wire HTP offers a variety of wire for every welding need. All HTP wires are of the highest quality available featuring excellent cast and helix properties. The cast and helix are very important qualities that reduce liner wear and keep feeding problems to a minimum. Available in a wide variety of diameters and spool sizes to fit your every welding need. HTP now offers 2-packs of our 10 lb. spools of wire, and 8-packs of our 2 lb. spools of wire.
Plasma Cutters & Plasma Cutting Accessories HTP Plasma Cutters HTP’s MicroCut 301 blasting through 1/4” steel. HTP initially made a name for itself with welders. So when we introduced our plasma cutters years ago, we had a lot riding on them – including our reputation. Like our welders, our cutters had to be rugged and tough, but they also had to be easy to use. We’re happy to report that we succeeded.
MicroCut 301 MicroCut 600 MicroCut 875S Open Circuit Voltage (volts DC) Cutting Voltage (volts DC) 220 16 5-25 amps Infinitely Variable 430 85 220 30 10 to 40 amps Infinitely Variable 350 110 230 40 30 to 55 amps Infinitely Variable 320 102 @ 55 amps 96 @ 45 amps Primary Voltage (volts) Primary Amperage (amps) Cutting Current (amps) Quality Cutting Capacity 5 16 “ @ Severance Cutting Capacity 3 8˝ Duty Cycle 20% @ 25 amps 20% @ 40 amps Weight Dimensions Length Width Height Cutting Torch Len
Plasma Cutters & Plasma Cutting Accessories MicroCut 600 #MC25600 List $1449.00 | Sale $1089.00 Don’t let the small size fool you – the MicroCut 600 is a real workhorse. It’s 40 amps of power allows you to cut ¼” steel at over 20 in/min., ” at over 10 in/min.
HTP Max Dry #25310-2 List $499.00 | Sale $360.00 Our Max Dry is the ultimate in an Air Dryer/Regulator. Perfect workstation dryer for the serious home shop or body shop. Forget those dryers that claim to get 99% of the water out of the air; the problem is, as the air cools off down line in your air hose, the humidity in the air condenses and turns into moisture, creating headaches for you. The Max Dry eliminates the problem. Here's how...
Plasma Cutters & Plasma Cutting Accessories HTP Plasma Parts & Accessories Plasma Parts Kit The cutting torch of plasma cutters is susceptible to the same heat damage and slag build-up as a MIG welding torch. Eventually, these parts will need replacing. Parts are available individually, or you can order the convenient parts kit in a handy carrying case with tip wrench.
2 3 4 Replacement Parts for HTP MicroCut 875S Illus # Description HTP Part # Price 5 1 1A 2 3 1A 4 5 HTP MicroCut 875S Replacement Parts for MicroCut 600 Illus # Description HTP Part # Price 1 2 3 4 5 Gas Diffuser Cutting Tip, 10-20 Amp Cutting Tip, 20-30 Amp Cutting Tip, 30-40 Amp Electrode Swirl Ring Torch Head 38005 60025 60031 60036 60003 62058 60002 1 Shield Cap - Drag Cutting Shield Cap - Stand Off Shield Cap - Gouging Safety Cup Cutting Tip - 60 Amp Cutting Tip - 40 Amp Cutting Tip - Wid
Accessories HTP Welding Aids HTP Nozzle Spray - 2 Per Pack - #12021 $19.95 If you own a MIG welder (any MIG) Nozzle Spray is a must. Prevents costly spatter build-ups on nozzles, tips, and swan necks. Not a silicone product, but a specifically designed anti-spatter formula. HTP Nozzle Gel - #12024-16 $10.00 Our HTP Nozzle Gel is the best anti-spatter material we’ve ever offered.
Welding safely is a top priority here at HTP, so wearing the proper protective garments is a must! Our green welding jacket measures a full 30" in length, from base of collar to bottom hem, for complete coverage. Constructed of durable 9.5 oz/sq. yd., flame retardant, 100% cotton sateen with non-reflective snaps at the sleeves and front for safe, secure closure and features an inside lapel pocket measuring a handy 6" x 5".
Auto Body Tools HTP Auto Body Tools HTP Stud Setter Kit - #12010 List $479.95 | Sale $365.00 Pull dents with professional results . . . and a whole lot more! This completely portable unit lets you work anywhere. Tests in bodyshops show that the Stud Setter can reduce labor costs by 40% to 80%. A great buy even if it did one job well . . . an incredible value to you because it does three jobs extremely well. Complete step by step instructions enclosed.
Includes rugged molded case, 4 replacement cutting bits, regulator and oiler. Measuring 1 ¼" long x 5 16" diameter, they can be used in any drill which runs between 700 to 1800 rpm. Of course, as with any cutting tool, use of a cutting oil will greatly increase the life of the tool. A B C D Auto Body Tools A. HTP Spot Mill - #90150 List $449.00 | Sale $267.00 Imagine the best spot weld removal tool you can.
Spot Welders HTP Quick Spot II #60501 Visit our online welding store anytime at www.USAWeld.com List $1095.00 | Sale $636.00 Now, with the HTP Quick Spot II, anyone can make factory looking spot welds quickly, easily, and affordably. This 220-volt powerhouse produces 6000 amps, making rust repairs and panel repairs a snap. The Quick Spot II welds with virtually no warpage, and finishing work is minimized because no metal is added in the welding process.
L = 10” 1 L = 4 ¾” L = 20” 2 3 L = 13 ¾” L = 4 ¾” 4 L = 4 ¾” 5 L = 13 ¾” 8 Spot Welders Optional Spot Welding Arms 6 Illus # Part # 9 L = 4 ¾” 1 2 3 4 5 6 7 8 9 673159 673152 673156 673158 673153 673155 673150 673151 673154 673045 Description 7 Price Internal Pinch Weld Arms $160.95 Straight Arms (Offset Electrode 10 " ) $141.95 Long Arms (20") $191.00 External Pinch Weld Arms $125.95 Straight Arms (Center Electrode 13 ¾" ) $161.95 $141.
Metal Working Tools HTP Metal Working Tools HTP Combination Punch & Flange Tool Here’s a remarkably easy way you can make professional looking and fitting replacement panels, without warpage, even in the center of large, flat panels. Best of all, you don’t have to be a highly experienced fabricator to get perfect results each and every time. The flanger will press a 7 8˝ wide, .040˝ offset in your panel. The benefit of flanging your panel is that it allows you to perform a lap weld rather than a butt weld.
MIG Parts HTP MIG Gun Parts Replacement Parts for HTP MIG Guns and Flexible Swan Neck MIG Welding Guns G K B C G H D A E F Illus # Part # A B C D E F G G H 15023B 15030B 15035B 15007 15106 15104 15105B 15108 15500 15058 15062B Description I J Price .023 " Contact Tips (Pkg 10) $5.00 .030 " Contact Tips (Pkg 10) $5.00 .035 " Contact Tips (Pkg 10) $5.00 Stud Welding Nozzle $12.21 Spot Welding Nozzle $8.95 Cylindrical Nozzle $7.95 Conical Nozzle (Pkg 3) $19.56 Small Conical Nozzle $7.
MIG Parts HTP MIG Gun Parts Compatible with the following welding guns. CENTURY ® Used on Century ® Quick Fix 75amp, 110/90, 130, 131, 140, 150, 160, 200, 85 amp Dual Purpose, 105/90. Illus # A B A B C C Description Part # Conical Nozzle Spot Weld Nozzle .023” Contact Tip .030” Contact Tip .
HTP MIG Gun Parts MIG Parts To see more MIG Gun replacement parts visit our online welding store at www.USAWeld.com Compatible with the following welding guns. Illus # LINCOLN ® Magnum ® 250L Welding Gun Parts Used on SP-250, SP-255, Wire-Matic ® 255, Power Mig ® 255 A B C A B C D D Description Part # Conical Nozzle .023" Contact Tip .030" Contact Tip .035" Contact Tip .
MIG Parts HTP MIG Gun Parts Compatible with the following welding guns.
HTP replacement welding guns are made to the highest standards – after all, they are OEM on our welding machines! We have taken the design principles employed in HTP welding guns and applied them to many of the replacement guns we build for other welders. CRIMP CONNECTION WITH INSULATION Trigger Wires MIG Parts MIG Replacement Guns Brass Fitting Insulated Crimp You really have to dig deep into the gun to see the quality.
MIG Parts MIG Replacement Guns Description 10' HTP Replacement Gun for Century 10' HTP Replacement Gun for Century 12' HTP Replacement Gun for Century 10' HTP Replacement Gun For Clarke 10' HTP Replacement Gun For Clarke 10' HTP Replacement Gun For Clarke 10' HTP Replacement Gun For DAN MIG 10' HTP Replacement Gun for Dayton 12' HTP Replacement Gun for Dayton 10' HTP Replacement Gun For Hobart 14A 10' HTP Replacement Gun for Hobart 10' HTP Replacement Gun for Hobart 10' HTP Replacement Gun for Hobart 10'
Description Fits the following Models HTP P/N Price 10’ HTP Replacement Gun for Mac Tools Fits WS007K, WS117, WS117K, WS120 S4320T10-15H $134.95 10' HTP Replacement Gun for Mac Tools Fits MW100, MW130, MW130A, MW145, MW145A, MW150, MW150K M2010 $109.95 10' HTP Replacement Gun for Mac Tools MW165, MW165A, MW175, MW 135X, MW 175X, MW185 Plus M195957 $112.00 10' HTP Replacement Gun for Mac Tools MW 145N, MW 185N 15100 $122.
Helmets HTP Striker Stealth Welding Helmets WG 2” X 3.78” Striker Stealth helmets make you invisible to the welding arc! HTP introduces the Striker Stealth series of welding helmets. Our Stealth helmets start with an ultra lightweight shell—weighs only 9 ¼ oz—made from 100% virgin DuPont Nylon. Next, we married the shell to a fully adjustable, ratcheting headgear.
Helmets Striker CFB Welding Helmet #90130-CFB List $129.95 | Sale $74.95 The Striker CFB is an extremely affordable, sharp looking addition to our Striker line-up of auto darkening helmets. The Striker CFB boasts a 1 ¾" x 3 ¾" viewing area, a full 6 ½" square inches, which allows you to easily see what you are working on, and it darkens super fast—adjusting from light to dark in 1/25,000th of a second.
11th Edition 180 Joey Drive, Elk Grove Village, IL 60007-1304 847-357-0700 800-USA-WELD (800-872-9353) fax: 847-357-0744 email: sales@htpweld.com www.USAWeld.com LIKE us on Facebook! facebook.com/HTPAmerica.USAWeld FOLLOW us on Twitter! twitter.com/HTPUSAWeld If you want to be removed from our mailing list call 800-USA-WELD and we will do so immediately.
