Owner`s manual

Fig. 1

(1) Depth

(2) Driver diameter

Fig. 1A

(1) Use mounting ring to mark position of speaker opening and fastening holes

(2) Cut out opening and drill holes

Make sure that the subwoofer is secured in such a way that it cannot slip or slide.

Use the screws provided for this purpose. Damage resulting from sudden changes

in speed (e.g. hard braking) is not covered under the terms of our guarantee.

CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)

The speaker system should preferably be connected to an external power amplifier. This

can provide the required electrical power and create corresponding dynamic reserves.

The relevant instructions also contain the customized connection diagram for the

operation of a speaker system.

Should you not have a power amplifier, the speakers can also be connected directly to

the radio. The relevant operating instructions also contain the connection diagram for this

situation.

Fig. 2

(1) Connect to speaker

(2) Connect to amplifier

(3) Colour-coded

Please note that only limited dynamic reserves will be available in this case.

Excessively low outputs combined with high distortions can destroy your

speakers.

INSTALLING THE GRILLE (FIG. 3)