User manual

22 / 36

naming menu selection and following dialog.

When this dialog is opened, a NAA discovery is run and a list of discovered adapters

appears in a few seconds. Selecting an entry from the list displays the selected

address and it's associated name on the right. Name can be modified and sent to the

device by clicking “Set” button. After each modification a re-discovery is run.

This way, different names can be assigned for different adapters for example for multi-

room use, so that different adapters can be recognized and found even if their

assigned IP address changes over time.

5.4. ASIO channel mapping

When using ASIO, in addition to just using default channel mapping it is also possible

to assign custom channel mappings. This can be done by selecting “ASIO Channel

Mappings...” from the “Tools” menu.

Network Audio Adapter naming dialog