User manual

21 / 36

In this dialog, distance to each individual speaker can be set in centimeters. Playback

of the speaker can be set using the volume slider and unit shown in upper right corner

is in dB.

Pink noise test tone can be played by selecting the “Test tone” box. When the box is

checked, tone will be played in all channels, thus making it easy to adjust all levels in

such way that the they sound equal. When the box is grayed, tone will be played one

channel at the time in rotating manner, making it easy to adjust all levels using an SPL

meter.

Multichannel delay processing is done in target sampling rate. This increases

processing accuracy as the output sampling rate is increased.

5.3. Network Audio Adapter naming

Network Audio Adapters can be assigned a non-default name using Tools / Network

Speaker setup dialog