User`s manual

Version 2.6 91 May 1
MP-202 Telephone Adapter 9. WAN Settings
9.3.3 General
This section displays the connection's general parameters.
Figure 9-19: General PPTP Settings
Table 9-8: General PPTP Settings
Parameter Description
Schedule
By default, the connection is always active.
However, you can configure scheduler rules (via
Advanced>Scheduler Rules) in order to define
time segments during which the connection may
be active. Once a scheduler rule(s) is defined, this
field changes to a drop-down list, allowing you to
choose between the available rules.
Network
Select whether the parameters you are
configuring relate to a WAN, LAN or DMZ
connection, by selecting the connection type from
the drop-down list.
MTU
MTU is the Maximum Transmission Unit. It
specifies the largest packet size permitted for
Internet transmission. When set to its default
(Automatic), the gateway selects the best MTU for
your Internet connection. Select 'Automatic by
DHCP' for the DHCP to determine the MTU. If you
select 'Manual', it is recommended to enter a
value in the range of 1200 to 1500.
9.3.4 PPP Configuration
Refer to ''PPP Configuration'' on page 82
9.3.5 PPP Authentication
Refer to ''PPP Authentication'' on page 83