Manualshelf

User`s manual

ManualsBrandsMAC Audio ManualsAutomotiveMP 13.2
31323334353637383940
MP-202 Telephone Adapter 32 Document #: LTRT-50605
User's Manual
5.1.1 Configuring Signaling Protocol Parameters
Note: In the current version release, only SIP (Session Initiation Protocol) is
supported.
¾ To configure signaling protocol parameters:
After clicking the menu 'Voice over IP' in the main screen, the 'Signaling Protocol'
screen opens by default (refer to the figure below).
Figure 5-1: VoIP - Signaling Protocol
Table 5-1: VoIP - Signaling Protocol
Parameter Description
Use SIP Proxy
When checked, outgoing calls will be routed to the configured SIP proxy. If
the parameter 'Use SIP Proxy IP and Port for Registration' is checked as
well, the configured SIP proxy will also be used as the registrar, allowing
incoming calls.
Use SIP Registrar
Check to use a separate SIP registrar server. Default is unchecked.