User`s manual

MP-202 Telephone Adapter 104 Document #: LTRT-50605
User's Manual
1. After selecting 'DHCP Relay' from the drop down menu, a 'New IP Address' link
appears:
Figure 10-7: IP Address Distribution - DHCP Relay
2. Click the 'New IP Address' link. The 'DHCP Relay Server Address' screen appears:
Figure 10-8: DHCP Relay Server Address
3. Specify the IP address of the DHCP server.
4. Click 'OK' to save the settings.
Table 10-4: Assigning Static IP Addresses to Network Computers
Disabled Select 'Disabled' from the drop-down list to statically assign IP addresses
to your network computers.
Figure 10-9: IP Address Distribution - Disable DHCP
10.1.4 Routing
You can choose to setup your Telephone Adapter to use static or dynamic routing.
Dynamic routing automatically adjusts how packets travel on the network, whereas static
routing specifies a fixed routing path to neighboring destinations.