User guide

Main Window
Transition Controls
65
Wirecast User Guide | 154809
Transition Controls
The transition area is in the middle of the Main Window:
There are two Transition buttons, but each can be configured to present one of many
possible transition types. In the image above, the two configured transitions are: Cut
and Smooth. Since Smooth is selected (button darkened), any transition executed by
clicking Go is a smooth transition.
Changing Transitions
If you click the Cut button, it becomes selected and making it the current transition
type:
You always have two different transition types available. You can also select one of the
two buttons by pressing Command+1 or 2 keys for the two transition types displayed.
If you click the down-arrow on the right side of either transition button, you can select a
new transition to assign to that button.
Transition Speed
The transition speed is set by selecting Switch > Transition Speed. There are five settings:
Slowest, Slow, Normal, Faster, and Fastest.
Click arrow to open menu
Select a transition type