User guide

Tutorials
Tutorial 1: Basic Concepts
42
Wirecast User Guide | 154809
single-click method is that you can only see one shot change at a time. Once you click a
shot, your viewers also see it (with no preview of how it looks on your part).
Turn AutoLive Off
An LED light, next to the Go button is lit when you are in AutoLive mode.
Make sure AutoLive is off by unchecking AutoLive in the Switch menu. A dialog box is
shown informing you that AutoLive is off and transitions must be made using the Go
button. Click OK in the dialog box to continue.
Try clicking the Ripples and River shots. Nothing happens because AutoLive is off. Now
click the Ripples shot and click the Go Button. The Ripples shot is taken live in the Live
Broadcast window. Click the River shot and, as expected, nothing happens. Click the Go
button again and the River shot becomes Live.
Note: When AutoLive is off, you must always click the Go button (or press the
Command+G keys) to display the selected shot in the Live Broadcast Area.
AutoLive LED