User guide

Tutorials
Tutorial 1: Basic Concepts
39
Wirecast User Guide | 154809
transition to assign to the button. You can also click the transition button and drag the
mouse downward until the menu of selections is displayed.
For example, to change the first transition button from Cut to Swoop, click the Cut
button and dragging downward until the menu appears. select Swoop from the menu.
Swoop should now be selected for the first button.
Now click back and forth between River and Ripples using Swoop.
These two transition buttons can also be selected by using the following key
combinations: Command+1 and Command+2.
Transition Speed
You can also control how fast a transition occurs, by selecting the Switch >Transition
Speed. Your choices range from Slowest to Fastest.
Go Button
The Go Button (or Command+G) enables you to make a transition.
Clicking the Go button does nothing when Wirecast is in AutoLive mode. The only
exception is that it will update a live shot if you have made changes to it using the Shot
Editor. Later in this tutorial you will discover how to use the Go button to transition
between different shots when AutoLive is off.
Click arrow to open menu
Select a transition type
Go button