User guide

Broadcasting
Streaming
213
Wirecast User Guide | 154809
Streaming
You can stream your broadcast to your service provider. To do this, click the Stream
button at the top of the Main window.
If you have not already selected a destination and logged into it, a dialog box displays.
Select a destination, log in when asked to do so, then click OK.
The Stream LED will blink until a connection is made. Once you are connected the LED
turns full on and a red box is placed around the Stream button. If you cannot connect
an error message will display.
Connection strength bars are displayed on the right. Fewer bars indicates a weaker
(slower) connection.
If the connection is ever broken, the green bars are reduced to a single red bar, then
immediately a no connection icon is displayed in place of the bars.
When the connection recovered, the no connection icon is replaced with the green bars.
Click Stream again to stop streaming. You can also record your broadcast by clicking
Record.
Record To Disk
If you want to archive your stream, you can use the Record To Disk destination.
Click Stream Click Record
Select Destination
Click OK
Red LED and red box
Green connection
strength bars
No connection icon