User guide

Broadcasting
CDN Partners
212
Wirecast User Guide | 154809
Flash To Zixi
To stream to Zixi, follow these steps:
1. Select Zixi from the Destination menu.
2. Select an encoder.
3. Enter Zixi connection information.
4. Enter your Zixi channel name and password.
5. Click apply to generate the RTMP URL. You only need to do this one time because
Wirecast stores the channel information for future streams. The default RTMP port
is 1935. You may need to configure your firewall to enable connections on this port.
Note: If you do not have a username and password, you can sign up with Zixi by
clicking the Zixi icon, or by clicking Sign Up.
6. Optionally, enter a Stream Delay value. This provides a time buffer between your
live stream from Wirecast and the actual broadcast itself. You can set the delay from
0 to 999 seconds. However, greater delays require greater memory use. The amount
of memory used is displayed when you enter the amount of delay.
7. Click OK.
Select an encoder
Select YZixi
Enter Zixi
connection info
Click Apply
Enter Channel Name
and Password
Enter delay (optionally)