User guide

Broadcasting
CDN Partners
209
Wirecast User Guide | 154809
Flash To TwitchTV
To stream to TwitchTV, follow these steps:
1. Select TwitchTV from the Destination menu.
2. Select an encoder.
3. Enter your TwitchTV username.
4. Click Authenticate to enter your password and generate the RTMP URL. You only
need to do this one time because Wirecast stores the channel information for
future streams. The default RTMP port is 1935. You may need to configure your
firewall to enable connections on this port.
Note: If you do not have a username and password, you can sign up with TwitchTV by
clicking the TwitchTV icon or by clicking Sign Up.
5. A default path is automatically provided for the RTMP Ingest URL. Use this URL
unless you have received a different one from TwitchTV.
6. Optionally, enter a Stream Delay value. This provides a time buffer between your
live stream from Wirecast and the actual broadcast itself. You can set the delay from
0 to 999 seconds. However, greater delays require greater memory use. The amount
of memory used is displayed when you enter the amount of delay.
7. Click OK when finished
Select Encoder
Select TwitchTV
Click Authenticate
and enter password
Enter Username
Enter delay (optionally)