User guide

Broadcasting
CDN Partners
207
Wirecast User Guide | 154809
Flash To Microsoft Azure, Brightcove, Limelight,
Sermon.net
To stream to one of these CDN partners, follow these steps:
1. Select a CDN partner from the Destination menu.
2. Select an encoder.
3. Enter the domain name or IP address (this is provided by the CDN partner).
4. Enter the stream name of your broadcast (this is provided by the CDN partner).
5. Click Set Credentials to enter your password and generate the RTMP URL. You only
need to do this one time because Wirecast stores the channel information for
future streams. The default RTMP port is 1935. You may need to configure your
firewall to enable connections on this port.
Note: If you do not have a stream name and password, you can sign up with the CDN
partner by clicking Learn More.
6. Optionally, enter a Stream Delay value. This provides a time buffer between your
live stream from Wirecast and the actual broadcast itself. You can set the delay from
0 to 999 seconds. However, greater delays require greater memory use. The amount
of memory used is displayed when you enter the amount of delay.
7. Click OK when finished.
Select an
encoder
Select host
server
Enter Stream name
Enter Address
Click Set
Credentials
Enter delay (optionally)
Click OK