User guide

Broadcasting
CDN Partners
205
Wirecast User Guide | 154809
CDN Partners
Listed below are the Content Distribution Network (CDN) partner destinations available
in Wirecast. Most destinations share a common user interface and only require a user
name and password. Destinations that do not conform to this paradigm, or require
additional parameters, are presented separately.
Note: The list of CDN partners in Wirecast is subject to change at any time.
Flash To Bambuser, Churchstreaming.tv, DaCast Streaming
Services, High School Cube, Livebeats, make.tv, Meridix
Sports Network, Netbriefings, ShowCaster, Streaming
Media Hosting, StreamVu, Stretch Internet, Sunday
Streams, Tulix, Ustream
To stream to one of these CDN partners, follow these steps:
1. Select a CDN partner from the Destination menu.
2. Select an encoder.
3. Enter your username.
4. Click Authenticate to enter your password and generate the RTMP URL. You only
need to do this one time because Wirecast stores the channel information for
future streams. The default RTMP port is 1935. You may need to configure your
firewall to enable connections on this port.
Note: If you do not have a username and password, you can sign up with a CDN
partner by clicking Sign Up.
5. Select your channel.
6. Optionally, enter a Stream Delay value. This provides a time buffer between your
live stream from Wirecast and the actual broadcast itself. You can set the delay from
0 to 999 seconds. However, greater delays require greater memory use. The amount
of memory used is displayed when you enter the amount of delay.