User guide

Broadcasting
Flash RTMP Server
204
Wirecast User Guide | 154809
Flash RTMP Server
Wirecast can stream to an RTMP/ H.264-compatible streaming server (Flash Media
Server, Wowza Media Server, etc.). Flash Players earlier than Flash 9, Update 3 (Dec
2007), may not be able to view the H.264 based streams.
To configure Flash Media Streaming, follow these steps:
1. Select Destination > RTMP Server.
2. Select an encoder.
3. Enter the Address to the RTMP server. (This is the same as the FMS URL in Flash
Media Server.) The default RTMP port is 1935, but you may need to configure your
firewall to allow connections on this port.
4. Wirecast can import a Flash Media Encoder configuration file (XML file). Click Open
FMLE XML File, and navigate to the configuration file and select either version 2.5 or
version 3.0. Wirecast reads the Address and Stream information from that file. Many
online streaming services offer FMLE configuration files which Wirecast can use.
Note: Only the Address and Stream information from the XML configuration file is
used. No Encoding information is imported.
5. Click OK to save your settings:
Click and
navigate to the
configuration
file
Click OK
Select a
Destination
Enter the
Address to the
RTMP server
Select an
encoder