User guide

Introduction
Using AutoLive
20
Wirecast User Guide |
• Use the Inspector window to open and edit shots The Inspector window acts
exactly like the edit window but always edits the last shot you changed. To open
the Inspector Window, click on the Window menu and select Inspector.
Using AutoLive
Some users of Wirecast may want to single-click a shot to make it become live. Other
users may want to make several changes to the broadcast before making them live. You
can use both methods in Wirecast.
The AutoLive feature is designed to offer a single-click operation for those users who
want to simply click from shot to shot. The Edit window (or other windows) is not
affected by the status of AutoLive.
When AutoLive is on, clicking a shot in the Main Window makes it become live. As a
result, the Go button becomes inactive. +Ctrl+Click loads a shot into the preview but
does not make it live.
When AutoLive is off, you click on a shot in the Main Window to display it in Preview,
then the Go button is required to make the shot live. +Ctrl+Click takes a shot live
immediately.
Sometimes you may want to temporarily turn on and off (toggle) the AutoLive state.
Hold down the and control keys at the same time to temporarily turn on Autolive. This
enables you to quickly switch AutoLive on for one action (i.e. a mouse-click), then off
again.
Go button