User guide

Source Settings
Capture Cards
143
Wirecast User Guide | 154809
Format Options Select a video format to use for transcoding. If you select Auto Detect
(the default) Wirecast with automatically detect the format to use from the incoming
stream.
Ignore Stream Timestamp When checked, stream timestamps are ignored. Every
Audio/Video frame has a Presentation timestamp, a time that tells the player when to
show the frame. Checking this box causes the Web Stream to ignore the presentation
timestamp set by the video stream and just use the current system clock.
Live Stream When checked, specifies that the stream is a live stream and video on
demand. For Wowza servers, it does not do anything, but for Adobe Media Servers, Live
Stream must be checked for live streams.
URI Enter the address of your input stream. (For example: rtsp://127.0.0.1:8080/
my_stream.sdp, or http://10.0.0.1/my_stream, or rtmp://hades.telestream.net:1935/live/
myStream).
ONVIF Authentication Click to connect to remote devices, like IP cameras, which
require login credentials for access. Check the Remember checkbox to save your
credentials to cause the device to automatically connect.
Save Settings Click to save your Web Service control settings.
Capture Cards
Note: Capture cards are supported under Studio and Pro licenses only, except for the
Black Magic capture cards which are also supported under the license and limited to
just one card.
Capture Cards are hardware extensions that enable you to bring in video from more
advanced HDMI and SDI sources. Most capture cards are automatically configured to
the best settings. Some cards (Blackmagic Intensity Pro, for example) require some
manual adjustments. When a Capture Card is selected, you can select the Frame
Format. Clicking Save causes the video to display. You can also check the De-interlacing
checkbox to turn on de-interlacing. Once configured, you can add Capture Cards from
the Live Source drop-down menu in the Main window.
Click OK
Enter Login info
Check Remember
STUDIO