User guide

Source Settings
Web Stream
142
Wirecast User Guide | 154809
Web Stream
The Web Stream option allows RTMP, RTSP, MMS, or HTTP streams to be taken directly
into Wirecast. This is useful for incorporating remote IP Cameras or other network
streams into a broadcast.
Select a Web Stream source. Sources are automatically detected and displayed in the
Web Stream list. They are also identified as ONVIF or Bonjour detection. Select also an
ONVIF Profile. Set controls as needed, then click Connect when finished.
The Web Stream controls are:
Protocol Select the protocol to use with your incoming stream.
Stream Options Select a set of options based on the protocol you selected (the sub-
protocol of the stream). RTSP can be transmitted over UDP, TCP, or HTTP. RTMP can be
transmitted non-encrypted, over http, encrypted. If unsure what to use, select Auto
Detect.
PRO
Select a Web
Stream source
Click
Connect
Set
Controls
Set ONVIF
Profile
Detection identifiers