User guide

Source Settings
Wirecast Cam
138
Wirecast User Guide | 154809
Wirecast Cam Settings
Click the Settings button to display the Wirecast Settings menu. Setup the Wirecast Cam
as needed for your broadcast, and click Done when finished.
Resolution Click to set the resolution of your camera. This value is displayed in the
lower left-hand corner of the Wirecast Cam app. It is always displayed.
Audio Turns the audio for your broadcast on or off. Audio is on when green is
displayed.
Key Frame Interval Serves as a reference for other frames in your broadcast. (See the
description provided in the Settings menu).
Bitrates Click to set the bitrate of your broadcast. The bitrate is displayed in the upper
left-hand corner of the Wirecast Cam app. It is only displayed while you are
broadcasting.
IP Address Displays the IP Address of your iOS device.
About Wirecast Cam Click to display version and copyright information about the
Wirecast Cam app.
Starting Your Wirecast Cam Broadcast
Once you have set up the Wirecast Cam app for your broadcast, select a camera (front
or back, turn on the microphone and light as needed, then click the Start button. Your
Click Done
when finished
Make settings
as needed