User guide

Source Settings
Wirecast Cam
137
Wirecast User Guide | 154809
Wirecast Cam Dashboard
Here is the dashboard of the Wirecast Cam app. There are five buttons, a time/bitrate
display, and a resolution/framerate display.
Time/Bitrate display Displays the time duration of your broadcast. The clock is reset
each time you start your broadcast by clicking the Start/Stop button. Displays also the
bitrate of your broadcast and is displayed only while broadcasting.
Microphone button Turns the microphone on and off. When off, the icon has a line
through it.
Settings button Displays the settings for Wirecast Cam (See Wirecast Cam Settings).
Start/Stop button Starts and stops your broadcast. When on, the button is square.
When off, it is round.
Switch Camera button Switches between front and back camera. When back camera
is selected, the icon does not change.
Light button Turns the iOS device light on or off. Only the back camera has a light. This
button is only displayed when the iOS device has a back side camera.
Resolution/Framerate Displays the current resolution and framerate settings. These
are always displayed, even when not broadcasting.
Microphone button
Settings button
Start/Stop button
Switch camera button
Light button
Time/Bitrate display
Resolution/Framerate display