User guide

Source Settings
System Devices
126
Wirecast User Guide | 154809
The Source Settings window is divided into four sections: System Devices, Preview
Window, Configuration Area, and Button Bar:
• The System Devices displays all the devices detected by Wirecast (USB and FireWire
devices, microphones, line inputs, Webcams, etc.). Sources used are selected from
this list.
• The Preview Window provides a preview of the video coming from a selected
source.
• The Configuration Area is for configuring sources. When a source is selected from
the System Devices list, the configuration options for that source are displayed.
• The Button Bar contains two buttons. Click the plus (+) button to manually add new
sources. Click the minus (-) button to remove them.
Note: De-interlacing has been moved from System Preferences (where it was a global
setting) to the Source Settings, where it is individually controlled by each device.
System Devices
System devices include Firewire devices, USB cameras, and other USB devices. Click on
a device to select it. Two drop-down menus and a configuration button are displayed.
The Capture Device Size menu selects the device resolution from 160x120 to 1920x1080,
depending on the camera. The Device Deinterlacing menu selects either None or
Blend. None turns off deinterlacing enabling the video to interlace normally. Blend
System
Devices
Configuration
Area
Preview
Window
Button Bar