Instruction manual

15
Description of Display Symbols
SYMBOL CONDITION ACTION
Appears when pulse reading
is displayed.
Record pulse reading.
Appears when recalling a
measurement from memory.
Memory banks.
Memory recall function
in progress.
Select bank for memory
storage or recall.
Appears when battery
voltage is excessively low.
Appears when measurement
cannot be obtained.
Replace batteries with
new ones.
Wait a minimum of 15
minutes and remeasure.
Loosen cuff to allow
blood circulation in the
arm.
14
Recalling Measurements in Memory
You can recall up to 50 measurements plus an average of the three most
recently stored measurements in memory from each memory bank. These
measurements can be shared with your physician or trained health care
professional.
1.Press the MEMORY button. The first reading
displayed is the average of the last three
measurements stored in memory. The letter ‘A’ wil
appear on the display,
Fig. 1.
2.Continue to press the MEMORY button to view the
next previously stored measurement,
Figs. 2-3.
NOTE: Each memory bank can store up to 50 readings.
When the number of readings exceeds 50, the oldest
data will be replaced with the new record.
Fig. 2
Fig. 3
Fig. 1