Instruction manual

16
If any abnormality occurs during use, please check and correct the following:
Condition Correction
Display is blank Check and correct the polarity
when power is on. of the installed batteries.
Reinstall or replace batteries.
Cuff pressure does not increase Check and reconnect cuff
after pressing “start” button. attachment and hose.
Measurement incomplete Review and follow “Applying Your
or abnormally low or Blood Pressure Cuff” and “Taking
high values displayed. Your Blood Pressure Reading”
sections.
Measurements are different Remember, blood pressure
from those typically measured readings are influenced by
by physician or every physical and mental conditions
measurement reading is and/or even the time of day.
different. Daily measurement recordings
should be presented to your
physician for interpretation.
Cuff pressure falls very slowly Tubing connector ring is missing
or not at all. Measurement and must be reattached. Removal
is not obtainable. of the ring should be avoided.
Troubleshooting