Instruction manual

Taking Your Blood Pressure Reading
5. The display will show the increasing
pressure in the cuff,
Fig. 4.
6. When a pulse is detected, the unit will
sound for each beat and the display
symbol will flash,
Fig. 5.
7. A long beep will indicate that the
measurement process is complete and
the cuff will automatically deflate.Your
blood pressure (systolic and diastolic)
measurement and pulse rate will be
simultaneously displayed,
Fig. 6.
8. To conserve energy, press the “on/off”
button to turn the power off. Otherwise
the unit will automatically shut off after
approximately 5 minutes.
If you need to take another measurement,
wait a minimum of 15 minutes between
readings to allow for the blood vessels to
return to normal. The wait time may vary
depending on your individual physiological
characteristics.
13
Fig. 4
Fig. 5
Fig. 6
Pulse
Diastolic
Systolic