MaaxTV LN5000HD User’s Guide How to use the LN5000HD set-top box
Contents 1. Safety............................................................................................................................ 1 2. Appearance................................................................................................................... 4 3. Rear Panel Connection................................................................................................. 5 4. Remote.......................................................................................................
1 Safety IMPORTANT SAFETY INSTRUCTIONS Read and follow these instructions. Heed all warnings. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time.
1 Safety During Installation Do not place LN5000HD in an enclosed area where the cooling vents are blocked or impede the flow of air through the ventilation openings. Install so that its position does not interfere with its proper ventilation. For example, do not place LN5000HD on a bed, sofa, rug, or similar surface that could block the ventilation openings. CAUTION! Do not place anything on top of your LN5000HD set-top box, especially other home entertainment components.
1 Safety FCC COMPLIANCE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2 Appearance Front Panel 1 1. Power indicator Front Panel 1 1.USB 2 3 2.USB 3.USB Rear Panel 1 1. WiFi antenna 2. 3. A/V out 4. Optical fiber out LN5000HD-User’s Guide 2 4 3 7 8 5 6 5. Reset key 6. TF card 7. RJ45 network interface 8.
3 Rear Panel Connection HDMI connection cable A/V connection cable White Red Yellow Optical fiber connection cable LN5000HD-User’s Guide 5
4 Remote Rear Panel Connection Wired Network Broadband Internet connection Internet WAN 1 2 LAN 3 Broadband Router/Modem LN5000HD-User’s Guide 6 4
4 Remote 1 17 2 3 18 4 5 6 19 7 8 9 20 10 21 22 23 24 25 26 27 11 12 13 14 15 16 LN5000HD-User’s Guide 7
4 Remote No. Key Function 1 Go in and out of Standby 2 Numeric input 3 Change the screen resolution on the fly 4 Volume Up/Dn 5 Show additional information when available 6 Show EPG when available 7 Generic exit button. Functionality depends on the application 8 Move left, right, up, down 9 OK 10 Shortcut to the System Setup menu 11 Red button. Functionality depends on the application 12 Green button.
5 First Time Set-Up When operating the box for the first time, you will be asked to set-up a basic set of features that are essential for having a good IPTV experience. Be advised that without a proper internet connection you cannot proceed to the main menu. Chapter 6 describes in detail on how to set-up the network.
6 Network Settings 6.1 Available Networks and Checking Current Network Status Check the available guaranteed bandwidth with your ISP. Recommended bandwidth: To ensure smooth playing of Internet video resources, the bandwidth should be at least 2Mbps. Router: For easy and quick connection, a wireless router is recommended. A common wireless router can meet the bandwidth requirement for ITPV. The HD509N Set-Top-Box integrates a Wi-Fi module, which can connect to wireless router directly.
6 Network Settings 6.3 Connecting to Wi-Fi 6.3.1 Connecting to wireless router • Enter “Settings” in the home screen, select “Wi-Fi” in the left, which has a switch in the right; please turn the switch to “ON” or press OK on the remote control to set this option to “ON”. • In the picture below, two Wi-Fi sources are available. The text below the name (SSID) indicates the encryption mode of the Wi-Fi connection. The icon to the right indicates the signal strength .
6 Network Settings LN5000HD-User’s Guide 12
7 Video Settings 7.1 Available Video Interfaces Connecting to TV through HDMI cable If the TV set has HDMI interface, the unit can be connected to the TV set with HDMI cable. After connecting, turn on the unit. the LED on the front panel is turned on, the screen shows boot logos and then enters the home screen after several seconds.
7 Video Settings 7.2.2 Screen size settings After adjusting the resolution, the screen edges will be cut or have black borders. Enter Settings - Display - Aspect Ratio, and press the Left/Right key on the remote control in the aspect ratio window and adjust. Tips: Zoom out the screen to the smallest (adjust the slider to the left), and then zoom in the screen (adjust the slider to the right), check the screen edges, and it is optimal when the screen edges coincide with the TV edges.
8 Specifications HDMI Interfaces 3 x USB Optical LAN Wi-Fi AV TF CARD slot Power supply 5V/2A Dimensions 150x105 x 28mm Net Weight 0.3kg Gross Weight 0.
9 Disclaimer This is an original work by Filotel S.A. and is protected by applicable copyright laws worldwide. Neither the whole nor any part of this work may be reproduced, stored, adapted or transmitted, published, modified in any form or by any means whatsoever, mechanical, electronic, photographic, graphic, optic recording or otherwise, translated into any language or computer language, without the prior written permission of Filotel S.A. Unless by way of a separate agreement, Filotel S.A.
