Owner`s manual
40
Owner’s Manual
English
REMINDER MESSAGES
General maintenance helps.
Reminder Messages can be suppressed by using the Preferences Menu. See Page 18.
Reminder Messages can be chosen individually by the Manufacturer. They may be disabled en-
tirely, or there may be a limited number of reminders on a specic model. The frequency of each
reminder (i.e. 7 days) can be specied by the Manufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with
the appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemis-
try with a test kit and adjust with the appropriate chemicals.
Clean the lter
May appear on a regular schedule, i.e. every 30 days.
Clean the lter media as instructed by the manufacturer. See HOLD on page 17.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is an important safety de-
vice and must be tested on a regular basis to verify its reliability. Every user should be trained to
safely test the GFCI or RCD associated with the hot tub installation. A GFCI or RCD will have a TEST
and RESET button on it that allows a user to verify proper function.
Change the water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis
to maintain proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days. Vinyl covers should be cleaned and condi-
tioned for maximum life.
Change the lter
May appear on a regular schedule, i.e. every 365 days.
Filters should be replaced occasionally to maintain proper spa function and sanitary conditions.
Additional messages may appear on specic systems.